Every time you finish playing on your PS4, it’s a good idea to switch it off. This not only aids in power conservation but also extends the life of your console. Several methods exist for turning off the PS4 thanks to PlayStation.
Using your controller to enter the main menu and turn off the PS4 there is the simplest method. However, your controller battery might be dead. As a result, you can also set the console to shut down automatically if you forget to do so, as well as turn it off without using it.
In this write-up, we will walk you through how to turn off PS4 Controller.
Why Should I Turn Off PS4 Controller?
While not in use, every gadget that uses a battery as a power source has to be switched off. The battery life of the PS4 controller, specifically, is 8 hours with average use.
However, to extend the battery’s life, you should reduce your energy use. Also, when you switch it off, the battery is not used, so you don’t spend power charging it. The PS4 controller should be turned off when not in use to preserve battery life, in short.
How to Turn Off PS4 Controller
Using the PS button
The location of the Power button will vary depending on the PS4 model you own. It will be in the center of the front of the original PS4 console. It is located on the bottom left side of the PS4 Pro.
Also, it is located on the left side of the PS4 Slim right next to the disc eject button.
Hold down the power button for around 7 seconds till you hear the PS4 beep twice before releasing it. Before the console turns off completely, you will see a white light.
Press the button and keep it down until you hear one beep to put the PS4 into rest mode. To let you know that the console is in rest mode, an orange light should come on.
Also, press and hold the button until you hear one beep to put the PS4 in rest mode. The console should illuminate with an orange light to show that it is in the Rest Mode.
Using PS4 Console
- Open Settings on your PS4.
- Select Power Save Settings.
- Select Time Until Controllers Turn Off in the Power Save Settings.
- Choose the interval after which your controller will no longer be active on the console. Now, when it is not in use, your controller will turn off automatically.
Using the Quick Menu
- Press and hold the PS buttons for about two seconds on the controller, until the Quick Menu appears.
- Then select “Sound/Devices”.
- Select “Turn Off Device”.
- Choose your DualShock 4 from the Turn Off Device Screen.
Why is My PS4 Controller not Pairing?
You can try to link your DualShock 4 controller with your system once again if it’s on but not functioning. However, you’ll need a second DualShock 4 controller that is in good working order to complete the repair.
- Go to Settings > Devices > Bluetooth Devices on your PlayStation dashboard.
- From the list, choose your idle DualShock 4 controller. The one without a green dot next to it will be it.
- Choose Forget Device by pressing the Settings button on your functioning controller. This will get rid of the broken, inoperative controller from your PlayStation.
- With a functional controller, press PS, then choose Power > Turn off PS4.
- Connect the malfunctioning controller to your PS4 via a USB cord after turning off your system fully, and then turn it back on.
- On your malfunctioning controller, press the PS button to connect to your PS4.
My PS4 Controller is Connected but not Working
- Open Settings and choose System Software Update.
- Tap Update Now.
- Choose Next in the update acceptance screen.
- Then choose “Accept” to start the update.
How to Hard Reset PS4 Controller
Try doing a hard reset on your DualShock 4 if your controller still won’t connect to your PlayStation 4. You won’t lose any of your previously stored game data if you do this, but your controller will return to its factory default settings.
- Switch off the PlayStation 4.
- Flip the controller over after unplugging it.
- Turn the controller over, find the recessed reset button in the little hole next to the L2 button, then push and hold it for at least 6 seconds with a paper clip or pin.
- Release the reset button after a brief delay. Next, connect the Micro-USB cord to the controller.
- Choose PS from the menu. The controller should be linked when the LED bar on it turns blue, at which point you may access your PS4 and start playing.
Conclusion
You must adhere to the fundamental principle of turning off the controller when not in use. This is especially helpful if you’re using the controller wirelessly. The battery’s life will be prolonged and its power will be conserved. To switch off the PS4 controller, use one of the techniques we listed.