How to Flash a Phone
Numerous factors lead people to flash their phones. When a phone is stuck, bricked, dead, or has lock-related issues, flashing may be necessary.
In these situations, you are either unable to access your phone at all or use it effectively. A fresh ROM is added on top of the one that was installed by the manufacturer during the flashing procedure.
You find that several of the apps on your phone are unexpectedly disappearing or acting weirdly, and your phone is operating too slowly.
These depressing situations are typical for phone users. The remedy is as easy and quick as flashing or resetting the phone.
You are mistaken if you believed that phone flashing was only for tech-savvy people since we will demonstrate how simple it is to do.
Table of Contents
How to Flash a Phone
The most popular method of flashing a locked Android phone is a hard reset, which avoids having to navigate the settings menu. Basically, all you have to do to execute a hard reset is turn the device off and boot it into recovery mode.
Remember that when you reset your phone, everything on it will be lost. It will assist you in unlocking the locked Android device, but it won’t save your data. So, before starting to reset it at all, make sure you have a sizable backup.
Although certain Android smartphones have unique methods for entering recovery mode, you can attempt these procedures;
- Turn off the phone first, then wait a moment.
- Kindly hold down the Volume Down and Power buttons. You must do so at the same time.
- Once the logo appears, let go of the Power button.
- When you get the “No command” screen with the robot that has fallen, wait until you see it before pressing the Power + Volume Down buttons once again to start recovery mode.
- “Wipe data factory reset” can be highlighted with the Volume Down button.
- By tapping the Power button, you can choose it.
- To highlight “Yes,” press the volume button, then press the power button once more to confirm.
- When the procedure is finished, click “Reboot system immediately” to turn on your phone.
Aside from the hard reset, you can use another method and this involves using a laptop and following these simple steps;
- Back up the information on your phone to a computer, the cloud, or an SD card with enough storage. To hack the backup process, you must understand how to flash a phone using a computer.
- The only way to flash your phone is after unlocking the bootloader. The bootloader is comparable to the BIOS on your computer. All Android devices come pre-configured with bootloaders that are locked and cannot be flashed. After placing your phone in flash mode, the fastboot flashing unlock command should work on the majority of devices. You must utilize the command prompt interface and connect your phone to a computer.
- For those asking how to flash a phone without a computer, the custom ROM download procedure is the simplest. One of the biggest advantages of using Android is custom ROMs. You can flash the custom ROM onto your phone and take advantage of the better performance if you are tired with the interface.
- Hold the volume down and power buttons together to start the phone in recovery mode, albeit the exact steps depend on the model of your phone. The action will display the bootloader screen, which offers a number of choices. In order to select and enter recovery, press the power button. One of the most challenging steps for those learning how to flash a phone is this one. Other than the recovery mode, you do not need to be concerned.
- Flashing ROM on an Android device – The recovery mode also has a variety of choices. The install button is the only thing you need to focus on. The wipe, install, settings, backup, and many others will be obvious. Just keep in mind that any mistake could ruin your phone. Therefore, when using the recuperation page, exercise particular caution. When you’re ready, choose the install button with the power button by using the volume up and down buttons to travel to it. You must select the firmware source on the next screen. Select Install zip from SD card to start the flashing procedure since you saved the firmware to your SD card. Your phone will reboot with the new software installed if all goes according to plan.